Introducing the Icy Dock ToughArmor MB991SK-B 2.5" SATA Mobile Rack solution for use in external 3.5" drive bay (Floppy bay). It is a smaller form factor device built specifically for systems with small real estate to work with. Using a heavy duty metal construction, it is capable to withstand the harshest enterprise type environments. The drive is fully secured by our proven technologies such as, the Eagle-Hook lock system and metal 2-segment safeguard key. Our full metal EZ Slide Mini Tray allows interchangeability of data between multiple systems with other ToughArmor products. Suggested applications in Medical & Military systems, Media servers, and IPCs, approved by Tier 1 companies.
Efficient Space Use
The MB991SK-B is perfect for use in industrial PCs, SMB SFF servers, mobile DVR systems, or even home servers. These systems tend to use components that provide the needed features, in the smallest form factor available. The ability to house one SATA SSD or HDD in a single 3.5” bay makes it a valuable asset in specific applications such as, integration into an industrial imaging or medical device.
Full Metal Protection
Making sure that the material used is designed in a way where it can be relied upon for many years after its deployment. The MB991SK-B is capable of holding up in the harshest environments, with the heavy duty metal construction throughout the entire device. The ToughArmor’s full metal design is perfect for industrial devices that may require a flammability rating as the full metal material is considered to already comply with flammability requirements. So because of the high build quality, it can be used various enterprise systems including: military and law enforcement deployment, as well as manufacturing conditions such as embedded control systems and factory automation systems including: military and law enforcement deployment, as well as manufacturing conditions such as embedded control systems and factory automation systems.
The full metal design also allows heat dissipation transfer from the hard drives throughout the mobile rack. In addition, Multi-Flow Technology effectively routes air flow correctly for excellent passive cooling in key ventilation slots on the front, rear, top and bottom. Lastly, Anti-Vibration Technology and EMI Grounding are used to provide a stable environment for the hard drives or SSDs used to perform at its best.
Convenient Utility & Accessibility
The front of the ToughArmor includes a status LED when the drive is powered on, off and accessed. Active Power Technology (APT) allows the status LED to be on only when a hard drive is inserted into the enclosure. For drive security, the eagle-hook lock system on the tray makes sure your hard drives will not eject when not needed. Additionally, the 2 segment key lock provides extra protection to theft of hard drives as well as safeguards any sensitive data.
The EZ Slide Mini trays make drive interchangeability and maintenance completely hassle free, in case of a hard drive failure. With a simple swap of the hard drive, your overall down time is greatly reduced especially if this occurs when it is time sensitive. The trays are also designed to accommodate 7 to 15mm height hard drive and SSD, creating a 2.5" hot swap bay for any standard SATA hard drives and SSDs. While the tray is not installed to the MB991SK-B, the Anti-Dust Flap feature helps prevent dust from entering into the mobile rack.
Make ToughArmor On-The-GO!
To access your data outside of your system or in a remote location, ToughArmor MB991U3-1SB is the way to go about. The drive tray slot of MB991U3-1SB is compatible with a variety of ToughArmor drive trays including the ToughArmor MB991, MB992, MB994, MB996 and MB998 series. This allows existing ToughArmor users to access their internal drive externally without opening up the case. It is a great tool for an individual drive diagnostic test. If you need to do a safe data erase or just simply expending system storage capacity, just remove the tray from the internal ToughArmor unit and insert it in the MB991U3-1SB to perform individual tasks externally with USB 3.0 interface. Best of all, the MB991U3-1SB uses USB bus-powered and it does not require a power adapter to operate. Simply connect the USB cable to any system and you are ready to go.
ICY DOCK ToughArmor MB991SK-B 2.5” SATA HDD/SSD Full Metal Mobile Rack in 1 x 3.5” Device Bay
Model Number :
Host Interface :
Single 7pin SATA
Drive Fit :
Single 2.5" SATA I/ II/ III HDD/ SSD
Compatible Drive Heights :
7mm, 9.5mm, 12.5mm & 15mm
Device Fit :
External 3.5" drive bay
Transfer Rate :
Up to 6 Gb/sec. (depending on hard drive speed)
Power Input :
Single 15pin SATA power port
Insert& Extract connection Via :
Direct SATA hard drive connection
Drive Cooling :
Metal heat dispersion
Power Indicator :
Solid green LED
HDD Access Indicator :
Flashing amber LED
Drive Security :
2 segment key lock
Dimension (L x W x H) :
5.32" x 4.00" x 1.01"
How to create a hybrid 2.5" storage array in a 5.25" bay with ICY DOCK
FLEX-FIT Trio & ToughArmor
To get the best bang for your buck, ICY DOCK offer cost-effective solutions to accommodate your data storage needs! By using a simple, yet functional 3.5" bay to 5.25" bay mounting kit, the FLEX-Fit Trio MB343SP, you can easily transform a 5.25" inch external drive bay in to a storage workhorse. Not only FLEX-FIT Trio accommodates 2x 2.5" SSD with tool-less drive installation design, it also allows placement of a 3.5" device bay, such as ICY DOCK's ToughArmor 2.5" drive mobile racks. This is where ICY DOCK's 3.5" ToughArmor series shines. By allowing a maximum of 5x 2.5" SAS / SATA hard drives or SSDs of 3.5" ToughArmor mobile rack in a FLEX-FIT Trio below. Let's take a look at them below!
"Overall, I am just as pleased with the MB994SP-4SB-1 and MB991SK-B as I was with the MB994IPO-3SB a little over a year ago. I feel that they are both high quality units that fit the requirements of their intended audience. I'd have no qualms recommending either to a friend or colleague.
The units have an excellent fit and finish and would be an excellent way to house a high-performance RAID SSD setup, or act as a convenient component for off-site backup."