The EZ-Fit Lite MB290SP-B is a great choice if you’re looking to install 1 or 2 SSDs/2.5” HDDs into a single 3.5” bay. If you’re looking for storage density, compatibility, flexibility, and durability without the hassle of a complicated installation, go with the EZ-Fit Lite MB290SP-B. It’s never been easier to effortlessly install 2.5” drives in a system. We, IcyDock, put a lot of thought into the design to fulfill the needs of our customers, whether they’re building Home Theater Systems (HTPC), Gaming PCs, or Mini-IPX systems. Our EZ-Fit Lite MB290SP-B certainly doesn’t disappoint.
IcyDock continues to raise the level of exceptional craftsmanship and design that our products are renowned for. The EZ-Fit Lite is our newest 2.5” HDD/SSD bracket and we’ve pulled out all the stops to engineer this unit to be both user-friendly and highly advanced. The EZ-Fit Lite accepts up to 2 x 2.5” SATA, or IDE SSD/HDD drive from 7mm to 9.5mm in drive height, which uses a completely new flex design system to simplify our drive installation process –all you need to do is insert the drive, and push inwards until it “clicks.” Our EZ-Fit Lite MB290SP-B has self adjusting tabs on the side that automatically conform to different drive heights (7mm and 9.5mm) to securely lock it in place. Lastly, the eject button allows for quick hard drive swapping in a matter of seconds without removing the entire bracket from the chassis. The best part about this device is it’s completely tool-less drive installation –just insert the drive and you’re set. It doesn’t get any easier.
We have blended a combination of flexibility & compatibility to create the EZ-Fit Lite MB290SP-B - a product that cannot be replicated by any of our competitors. The EZ-Fit Lite MB290SP-B provides a whopping 60 screw holes to accommodate 3.5” bay installation in practically every computer chassis. Compare this with a standard 3.5” hard drive that only offers a measly 10 screw holes, and you’re offered a lot more options. In addition to 60 screw holes, there are 12 different ways you can mount the EZ-Fit Lite MB290SP-B in your system in comparison to the 2 positions you get with a standard 3.5” drive; this gives you option to finely tune and adjust your drive installation. There are screw holes located both on top of the unit and on bottom to give you extra compatibility. Furthermore, the plethora of screw holes provides a backup measure in case of installation failure.
Unbelievably Lightweight with Remarkable Cooling
Our EZ-Fit Lite MB290SP-B is constructed with highly robust ABS plastic and fuses desirable traits such as durability and lightweight. One piece construction means there are less moving parts to be concerned with, which in turn means it’s less likely break. Additionally, creating a one-piece design makes manufacturing this unit very cost efficient and allows us to pass the savings onto our customers. The frame has a weightless flexible stabilizer that secures the drive in place and provides shock absorption and anti-vibration properties –great for protecting your drives against impact. Open air designs allow the drive to be cooled by the fans in your chassis. With our skeletal design, the EZ-Fit Lite MB290SP-B allows airflow in all the crucial areas of the drive which helps drive performance. Elevated ridges on the platform raise the drive just enough to allow heat dispersion keeping your SSD/HDD cooler. We’ve also included side vents on the bracket to let heat escape from the drive
Desktop PC, Gaming PC, Home Theater PC, Mini-ITX Systems, Home Server Systems
* Durable one-piece design
* Anti-Vibration design for improved reliability
* Fits 2 x 2.5” SATA/IDE SSD/HDD into one 3.5” drive bay
* Compatible with 2.5” SSD & HDD with 7mm to 9.5mm drive height
* Quick release eject mechanism for hassle free tool-less drive installation
* Universally designed screw placement for maximum compatibility
* 60 screw holes provide maximum flexibility of installation
3 Years Warranty
ICY DOCK EZ-Fit Lite MB290SP-B 2 x 2.5” to 3.5” Drive Bay SATA/IDE SSD/HDD Mounting Kit / Bracket / Adapter
Model Number :
Drive Fit :
2 x 2.5” IDE/SATA SSD/HDD
Support Drive Height :
7mm – 9.5mm
Device Fit :
1 x 3.5” Hard Drive Bay
Dimension (L x W x H) :
5.30" x 4.17" x 1.00"
Package Contents :
Device x 1, User Manual x 1, Screw x 4
Best adapter bracket I have found
-The tool less, pressure fit system for the drives is brilliant. You simply push the drive in until the latch clicks, and you're done.
-This thing has EVERY mounting hole imaginable.
-Being plastic, it is much less complex, yet just as, if not more, sturdy than many others I have used.
by Taylor M. on 4/3/2016.
No Screws Needed, Works Great
I needed to mount a small SSD in my Dell computer - which only has 3.5 full sized slots. After some consideration I ordered this one. I find it to work very well, with no tools required to mount the SSD.
The device has two levels, so that dual SSD can be mounted. The SSD slides in and fits snugly, and is held in place by a couple of plastic tabs.. Then the entire assembly went into the computer exactly right. I have no complaints at all about this model. They include four small screws to secure the holder into the bay, but those were not needed, because Dell has sliding removable mounts.
The only thing to note is that the drives may sit further away from the end of the mount than a normal 3.5 drive, so you might need to be creative with running the power and data cables to the SSD. Not really that big a deal.
Summary: If you are looking for a good SSD mounting solution at a great price, look no further. Highly recommended.
by John Green on 3/7/2016.
Nice holder for a pair of Solid State Disk Drives
Just built a desktop from parts and opted to use two 2.5 inch 250GB SSDs (one for software and one for data). This holder provided a nice way to mount them in the standard 3.5 inch drive bay slots. Very solid and secure holder. This is a very good product that I would recommend.
Note: Because of the height limitations in a standard bay, the SSDs in this twin drive holder have to be very close to each other, separated on my a couple of mm. This matters in deciding how to connect the power and SATA cables. You may need to install one SSD upside down if you have right angle SATA cable plugs, or get straight cable plugs. For the power connectors I had to use two separate cables from the power supply (one routed to an SSD from the top and the other from the bottom). There is enough surface contact area in a slot, that you can leave one of the SSDs unclipped so that it extends out a few mm for easier cable connection access.