Introducing the ToughArmor MB411SPO-B, a full metal 2.5” SATA/SAS hard drive mobile rack designed for use in any slim ODD/FDD bay. The MB411SPO-B uses full metal construction to ensure maximum device lifespan and is capable of withstanding the harshest environments. The EZ Slide Micro tray provides hot-swap ability for hassle-free drive maintenance. Utilizing its ultra low profile design, the MB411SPO-B is a perfect storage device for system that has limited space but also requires data storage such as OEM/ODM systems, embedded control systems, factory automation systems, rackmount computers, rackmount servers and IPCs.
Almost as Slim as 2.5” Drive
The ToughArmor MB411SPO-B is designed amazingly slim and able to keep its size as small as 2.5” HDD, which makes it a complete space saver for any enterprise systems. This small form factor design allows MB411SPO-B to fit in any system that has tight space constraints such as mobile computers and embedded systems. It is also a great 2.5” mobile rack for any OEM / ODM systems that have space limitation, as system builders can easily configured their storage needs with MB411SPO-B, without wasting unnecessary space from the system.
Designed for Slim ODD & Slim FDD Bay
The MB411SPO-B is designed to fit both slim ODD and FDD bay. To use with slim FDD bay, simply unscrew three screws from metal ODD bracket and then remove the ODD bracket from the device and ready to use. With MB411SPO-B, you can quickly add a 2.5” SATA HDD / SSD to any system that has slim ODD or slim FDD bay. Or replace it with existing slim ODD / FDD device and upgrade to 2.5” solid state drive for significantly improve your overall system performance.
Removable Design with Exceptional Build Quality
The EZ Slide Micro tray supports hot-swap and makes maintenance completely hassle free in the event of a hard drive failure. With a simple swap of the hard drive, your overall down time is greatly reduced which is especially useful for time sensitive projects and applications. The tray is designed to accommodate a 7 to 9.5mm height hard drive or SSD, creating a 2.5” hot swap bay for any standard 2.5” SATA/SAS drive. Once you close the latch, the eagle-hook lock system keeps drives secured within the enclosure.
Ensuring the material used can be relied upon for many years after its deployment, the MB411SPO-B is capable of holding up in the harshest environments, with heavy duty metal construction throughout the entire device. The ToughArmor’s full metal design is perfect for industrial devices that may require a flammability rating since all-metal already complies with flammability requirements. Because of the high build quality, it can be used in various enterprise systems including: military and law enforcement deployment. It can also be used in manufacturing conditions such as embedded control systems and factory automation systems.
Bringing more utility your hard drives, a LED is installed into the front of the mobile rack to provide drive status information at all times. Active Power Technology (APT) allows power to be on only when a hard drive is inserted into the enclosure. For security, the eagle-hook lock system on the tray makes sure your hard drives will not eject when not needed. Finally, the ToughArmor MB411SPO-B supports 7pin SATA with locking latches so you’ll never need to worry about cables unintentionally disconnecting from your mobile rack. Once the cable is connected, it’ll lock into place and stay that way.
Make ToughArmor On-The-GO!
To access your data outside of your system or in a remote location, ToughArmor MB991U3-1SB is the way to go about. The drive tray slot of MB991U3-1SB is compatible with a variety of ToughArmor drive trays including the ToughArmor MB991, MB992, MB994, MB996 and MB998 series. This allows existing ToughArmor users to access their internal drive externally without opening up the case. It is a great tool for an individual drive diagnostic test. If you need to do a safe data erase or just simply expending system storage capacity, just remove the tray from the internal ToughArmor unit and insert it in the MB991U3-1SB to perform individual tasks externally with USB 3.0 interface. Best of all, the MB991U3-1SB uses USB bus-powered and it does not require a power adapter to operate. Simply connect the USB cable to any system and you are ready to go.
Ideal 2.5” mobile rack for system that has tight space constraints such as embedded systems, mobile computers, rackmount computers, rackmount systems, industrial automation control system, military computers and OEM / ODM systems
Ultra small form factor design for maximum space saving
Fits 1 x 7mm to 9.5 mm height 2.5” SAS/SATA HDD /SSD in a slim ODD or slim FDD bay
Supports 2.5” SAS (single channel)/SATA HDD/SSD up to 6Gbps transfer rate (SAS host is required for SAS drives)
Removable EZ Slide Micro drive tray for easy maintenance
Heavy duty full metal construction designed for perfect for enterprise applications
Anti-Vibration Technology creates a safe environment for hard drives or SSDs
Active Power Technology (APT) powers up individual LED if only there is drive installed in the drive bay
EMI Grounding protects hard drives from electrical damage
Locking latch designed for SATA 7 pin data port
3 Years Warranty
Model Number :
Device Interface :
Single 22pin SATA (Support SAS single channel)
Drive Fit :
Single 2.5" SAS/SATA HDD/SSD (SAS host required for SAS drives)
Compatible Drive Heights :
7mm to 9.5mm
Host Interface :
Single 7pin SATA
Device Fit :
Slim ODD or slim FDD bay
Transfer Rate :
Up to 6 Gb/sec. (depending on hard drive speed)
Power Input :
Mini 4-pin power wafer
Insert& Extract connection Via :
Direct SAS/SATA hard drive connection
Drive Cooling :
Metal heat dispersion
Power Indicator :
Solid green LED
HDD Access Indicator :
Flashing green LED
Drive Security :
Eagle-hook locking mechanisms
ODD Dimension (D x W x H) :
129.0 x 128.1 x 12.7mm
FDD Dimension (D x W x H) :
129.0 x 95.8 x 12.7mm
Package contents :
Device, user manual and screws
Optimize the Capability of a FDD / ODD Bay for Maximum Usability with the MB411SPO-B Hot Swappable 2.5” SAS / SATA Mobile Rack for FDD / ODD Bays
Dealing with physical dimension constrains is a key factor when designing a customized build such as portable, SFF( small form factor) desktop workstation, mobile DVR surveillance system, POS system, embedded system and in-flight entertainment system. Each computer component has to be minimized physically but must retain its functionally and purpose, such as the CPU for data processing, ram for temporary data retention and hard drives or SSDs for storage of critical data. However, accessibility of these components does not have to be compromised as well. For example, with the ICY DOCK ultra slim hot swappable SATA SSD / HDD mobile rack, MB411SPO-B, IT professional can easily install one of these units in a FDD or ODD slot of the SFF system yet retain a hard drive's hot swap capability. Users can easily swap out the drives from the front panel for backup, replacement, or simply accessing a different set of data. It is especially useful when installed in a rugged system because the MB411SPO-B is built with a full metal construction and can easily become complied with flammability requirement; it can be deployed in some of the toughest environments and keeps your critical data safe.