•Supports 2 x 2.5" SSD/HDD, from 5-15mm height
•Supports RAID 1 and JBOD modes
•Installs into any standard external 1 x 5.25" optical drive bay
•Supports up to 6 Gbps data transfer speed
•Built-In JMS562 hardware RAID chipset
•Easy-to-read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process

metal_tray_enclosures,sas_sata_enclosures,compatible_525_enclosures

•Supports 6x U.2/U.3 PCIe NVMe SSD, with a max drive height of 9.5mm
•Designed to fit into any standard external 5.25" optical drive bay
•Utilizes 3x slimSAS 8i (SFF-8654) to support 6x U.2/U.3 SSDs
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Ruggedized full-metal enclosure that meets flammability requirements

nvme_enclosures metal_tray_enclosures

•Supports 1 x U.2/U.3 NVMe SSD with a height of up to 9.5mm
•Compatible with PCIe 4.0 x4/ x8 /x16 Slot
•Supports PCIe Gen 4.0 x 4 speed up to 64Gbps
•Supports drive hot-plug without requiring the system to be powered down
•Active Power Technology (APT) – drive activity LED only powers up if there is a drive installed in the bay
•Optional 2-pin drive activity signal output - allows for easy transfer of the drive activity signal to the front of the computer case

nvme_enclosures,metal_tray_enclosures

•Supports 4x PCIe NVMe U.2/U.3 SSD, up to 15mm drive height
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Ruggedized full-metal enclosure meeting flammability requirements

metal_tray_enclosures,nvme_enclosures

•Fits 2x 2.5” U.2/U.3 NVMe SSDs from 5-9.5mm height •Installs into standardized external 3.5” device bay (floppy bay) •Uses 2x Slimline SAS (SFF-8654 4i) connector, pinout defined by SFF-9402 Rev 1.1 •Supports NVMe 4.0 64Gbps transfer rates per drive bay •Ruggedized full-metal enclosure and drive trays •2-segment key lock for additional physical security
nvme_enclosures metal_tray_enclosures

•Supports 4x PCIe NVMe U.2 SSD, up to 15mm drive height
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Ruggedized full-metal enclosure meeting flammability requirements
•Removable tray system for easy maintenance

metal_tray_enclosures, nvme_enclosures

•Supports 2 x 2.5” SATA HDD/SSD, from 5-15mm height
•Installs into any standard external 1 x 5.25” optical drive bay
•Supports up to 6 Gbps data transfer speed
•Built-In JMS562 hardware RAID 1 mirroring (SAFE) chipset
•Easy to read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process
•Anti-Vibration Technology (AVT) – reduces noise and protects against environmental damage

metal_tray_enclosures,sas_sata_enclosures,compatible_525_enclosures

•Supports 24 x 2.5" SAS/SATA SSDs & HDDs, up to 7mm in height
•Installs into 3 x standard external 5.25" bay
•Transfer speed up to 12Gb/s for SAS drives & 6Gb/s for SATA drives
•Powers 24 x 2.5" SAS/SATA drive through 6 x 15-pin SATA power connector
•Connects 24 x 2.5” SAS/SATA drive through 6 x MiniSAS HD (SFF-8643) connector
•Large 80mm cooling fan with three-mode fan speed control (high/low/off)

metal_tray_enclosures,minisas_hd_enclosures,sas_sata_enclosures,high_density_enclosures,compatible_525_enclosures

•Compatible with Mac Pro 2008-2012 models with no driver required
•Fits 1x SATA hard drive or SSD from 7mm to 9.5mm in height
•Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots
•Installs into single-width PCIe expansion slot
•PCIe interface provides both power and data transfer which ultimately reduce cable clutter
•Narrow design allows for multiple bays to be installed side-by-side in a modular design

metal_tray_enclosures,nvme_enclosures other_compatible_enclosures,sas_sata_enclosures

•Fits 1x 2.5” U.2 NVMe SSD or 2.5" SAS / SATA SSD
(NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD)
•Installs into any standard external 3.5” device bay or floppy bay
•Uses an U.2 port (SFF-8639) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps
•Ruggedized full-metal enclosure meeting flammability requirements
•2-segment key lock for additional physical security

nvme_enclosures,metal_tray_enclosures

•Convert your M.2 NVMe SSD into the 2.5” U.2 NVMe form factor with 9.5mm height
•Exact same dimensions, port locations, and screw-hole locations as a standard U.2 drive
•Accepts any M.2 PCIe NVMe SSD from 30mm to 80mm in length
•Enables hot-plug functionality for any M.2 PCIe NVMe SSD
•10,000 insertion/removal cycle rated U.2 connector
•Supports full Nvme bandwidth specification of 64Gbps

hdd_ssd_adapters

•Convert your M.2 SATA SSD to a 2.5" SSD form factor, 9.5mm in height
•Exact same dimensions, port locations, and screw locations as a 2.5" SSD (9.5mm height)
•Accepts any M.2 SATA SSD from 30mm to 80mm in length (2230 / 2242 / 2260 / 2280)
•Enables hot-swap functionality for any M.2 SATA SSD
•Supports full SATA III bandwidth specification of 6Gbps
•100% tool-less and screw-less M.2 drive installation

hdd_ssd_adapters