•Fits 2x E3.S NVMe SSDs up to 7.5mm height
•Installs into standardized external 3.5” device bay (floppy bay)
•Uses a MCIO 8i connector, supporting PCIe 5.0 x4 with transfer speeds up to 128GB/s
•Supports hot-plug functionality for E3.S SSD (dependent on host environment)
•Comes equipped with a 25mm fan, which can be replaced without disassembling the entire unit
•Ruggedized full-metal enclosure and drive trays

•Length: 0.5 meters (19.69 inch)
•Connectors comply with SFF-8654 design specifications
•Transfer speeds to meet PCIe 4.0 specifications
•SFF-9402 compliant cable design supports mainstream NVMe/Tri-mode HBA/RAID cards
•Cable has passed the UL20744 certification and meets the safety requirements

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures,tool-less_tray_enclosures

•Supports a single U.2/U.3 PCIe NVMe SSD
•10,000+ rated insertion and removal cycle connector
•Blazing-fast 40Gb/s transfers via USB4 and Thunderbolt 4
•Backward compatible with USB 3.0, USB 2.0, and Thunderbolt 3
•Tool-less SSD installation design with or without a drive tray
•Vibrant blue activity LED
•User-friendly, large slide-switch power control

•Accommodates 8x U.2/U.3 PCIe NVMe SSDs, supporting a maximum drive height of 7mm.
•Fits any standard external 5.25" optical drive bay.
•Utilizes 4x MCIO 8i (SFF-TA-1016 8i) connectors for 8x U.2/U.3 SSDs.
•Delivers PCIe 5.0 speeds with transfer rates up to 128Gb/s per drive bay.
•Compatible with Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more).
•Rugged full-metal enclosure meeting flammability standards.
•Removable tray system for simplified maintenance.

•Accommodates 4x 2.5" SAS/SATA SSD/HDD (5-9.5mm), with improved support for 7mm drives through a specialized stabilizing mechanism.
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (Single channel SAS, SAS host required)
•Fits any standard external 5.25" optical drive bay
•Tray-less and door-less architecture enables tool-free hot-swapping of bare drives
•Individual drive power button and a newly optimized drive ejection mechanism for reliable operation.
•High-performance 40mm cooling fan with adjustable speed control and on/off jumper for thermal management

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures,tool-less_tray_enclosures

•Fits 1 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 3.5” device bay or floppy bay
•Uses a SlimSAS 4i (SFF-8654) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64Gbps

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures

•Fits 2 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 3.5” device bay or floppy bay
•Uses 2 x SlimSAS 4i (SFF-8654) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64Gbps

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures,tool-less_tray_enclosures

•Designed for a 3.5" floppy bay in either a computer case or rackmount.
•Holds 2 x EDSFF E1.S NVMe SSDs (compatible with 9.5mm and 15mm heights).
•Uses a MCIO 8i connector, supporting PCIe 5.0 x4 with transfer speeds up to 128GB/s.
•Features a removable drive tray with tool-less SSD installation for user-friendly maintenance.
•Comes equipped with two 25mm fans, which can be replaced without disassembling the entire unit.
•Supports hot-swap functionality for EDSFF E1.S SSD (dependent on host environment).

•Accommodates 8 x M.2 NVMe SSD with drive lengths from 30mm to 80mm (2230 / 2242/ 2260 / 2280) in a single PCIe x16 expansion slot (Full-height, full-length)
• Featuring a Built-in PCIe Bifurcation Function, empowers users to access eight individual M.2 NVMe SSDs in systems that do not natively support PCIe Bifurcation
•Delivers unmatched transfer speeds of up to 128Gbps for each M.2 NVMe PCIe SSD.
•Effortless maintenance with removable drive trays featuring a tool-less design.
•Superior heat dissipation via integrated M.2 drive heat sinks and thermal pads.
•50mm blower fan ensuring optimal cooling for each M.2 NVMe SSD.

•Supports 8 x PCIe M.2 NVMe SSDs of all lengths - 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into 1 x standard external 5.25" optical drive bay
•Uses 8 x OCuLink (SFF - 8612) to connect, pin-out defined by SFF - 9402 Rev 1.1
•Supports PCIe 4.0 specifications with transfer rates up to 64Gbps per drive bay
•Powers 8 x M.2 SSDs through 2 x 15 - pin SATA power connectors
•Ruggedized full - metal enclosure meeting flammability requirements

nvme_enclosures,tool-less_tray_enclosures,high_density_enclosures

•Supports 2 x 2.5" SSD/HDD, from 5-15mm height
•Supports RAID 1 and JBOD modes
•Installs into any standard external 1 x 5.25" optical drive bay
•Supports up to 6 Gbps data transfer speed
•Built-In JMS562 hardware RAID chipset
•Easy-to-read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process

metal_tray_enclosures,sas_sata_enclosures,compatible_525_enclosures

•Accommodates up to 8 x 2.5" SAS/SATA HDDs/SSDs in a single 5.25" bay
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single channel)
•Removable drive tray system for easy maintenance and hot-swap support
•Accommodates 2.5" drives with 5mm & 7mm height
•Active Power Technology (APT) - powers up only when a drive is installed in the bay
•Blue indicator LED provided for each bay

•Plug and play installation, no drivers required
•SuperSpeed USB 3.0 with UASP Support
•Backward compatible with USB 2.0 interface
•eSATA connection with up to 6Gbps transfer speed (port-multiplier host required to access all four drives)
•New EZ-Tray system supporting both 2.5” and 3.5” SATA HDD/SSD of all heights •Adjustable cooling fan with 3 speed settings (low, high, and auto)

•Plug and play installation, no drivers required
•SuperSpeed USB 3.0 with UASP support
•Backward compatible with USB 2.0 interface
•eSATA connection with up to 6Gbps transfer speed (port-multiplier host required to access all four drives)
•New EZ-Tray system supporting both 2.5” and 3.5” SATA HDD/SSD of all heights •Adjustable cooling fan with 3 speed settings (low, high, and auto)

•Fits 4x M.2 NVMe SSDs of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into any standard external 5.25" optical drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Connects with 4x OCulink (SFF-8612) (NVMe host required)
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Patent-pending screw-less M.2 adjustable locker securely holds all length drives
metal_tray_enclosures,nvme_enclosures , sas_sata_enclosures,tool-less_tray_enclosures

•Supports 6x U.2/U.3 PCIe NVMe SSD, with a max drive height of 9.5mm
•Designed to fit into any standard external 5.25" optical drive bay
•Utilizes 3x slimSAS 8i (SFF-8654) to support 6x U.2/U.3 SSDs
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Ruggedized full-metal enclosure that meets flammability requirements

nvme_enclosures metal_tray_enclosures

•Supports 1 x U.2/U.3 NVMe SSD with a height of up to 9.5mm
•Compatible with PCIe 4.0 x4/ x8 /x16 Slot
•Supports PCIe Gen 4.0 x 4 speed up to 64Gbps
•Supports drive hot-plug without requiring the system to be powered down
•Active Power Technology (APT) – drive activity LED only powers up if there is a drive installed in the bay
•Optional 2-pin drive activity signal output - allows for easy transfer of the drive activity signal to the front of the computer case

nvme_enclosures,metal_tray_enclosures

•Supports 1x M.2 PCIe NVMe SSD, sizes 2230, 2242, 2260, 2280, 22110
•Support transfer speeds up 16Gbps under PCIe 3.0 x2 using CFexpress Type B connection
•Removable drive tray with tool-less drive installation for easy drive maintenance
•The removable drive tray is equipped with a heat sink for optimal cooling efficiency
•Multiple 1/4" mounting holes for universal mounting on various camera systems
•Include a 1/4" to 3/8" reducer bushing for the 3/8" mounting system

•Fits 2 x E1.S NVMe SSD, compatible with 9.5mm thickness.
•Uses 1x PCIe 3.0/4.0 x8 or x16 slot (PCIe Bifurcation x4, x4, x4, x4 for PCIe 16x and x4, x4 for PCIe 8x is required to access both drives)
•Supports hot-swap/hot-plug E1.S NVMe SSD.
•Removable drive tray with tool-less drive installation for easy drive maintenance.
•The eagle-hook lock system keeps the drive secured in the enclosure.
•Equipped with a 50mm blower fan for maximum thermal performance.

•Fits 2 x M.2 NVMe SSD with drive lengths from 30mm to 80mm (2230 / 2242/ 2260 / 2280 / 2580) in a single PCIe x8 expansion slot (Full-height, half-length)
•1 x PCIe 3.0 or 4.0 x8 / x16 expansion slot (motherboard required PCIe x8 slots bifurcated into x4/x4 or PCIe x16 slots bifurcated into x4/x4/x4/x4)
•Supports PCIe 5.0 transfer speeds up to 128Gbps per M.2 NVMe PCIe 5.0 x 2 SSD
•Removable drive tray with tool-less drive installation design for easy drive maintenance
•Integrated individual M.2 drive heat sinks and thermal pads for max heat dissipation
•Equipped with a 50mm blower fan offers maximum cooling to M.2 NVMe SSD
•Individual drive activity LED indicator (Solid green for power and flashing green for drive activity)

•Supports 2 x 2.5" SSD/HDD or 3.5" SATA hard drive
•Supports RAID 1 and JBOD modes
•Installs into any standard external 2 x 5.25" optical drive bay
•Supports up to 6 Gbps data transfer speed
•Built-In JMS562 hardware RAID chipset
•Easy-to-read RAID status LED indicators for drive power, access, fail and RAID 1 rebuilding process

sas_sata_enclosures,drive_tray_enclosures

•Full metal removable SSD/HDD tray specifically designed for medical & military systems.
•Hot-swap design for effortless system maintenance.
•All metal design built to meet the toughest environment and to compliant with flammability requirement.
•Metal key lock and thumb screw for extra security.
•Support both SSD and HDD – 7mm to 9.5mm.
•Support SATA I/II/III 6.0Gbps.

• Full metal removable SSD/HDD tray (MB491TKL-B x 1) specifically designed for medical & military systems.
• Hot-swap design for effortless system maintenance.
• All metal design built to meet the toughest environment and to compliant with flammability requirement.
• Metal key lock and thumb screw for extra security.
• Support both SSD and HDD – 7mm to 15mm.
• Support SATA I/II/III 6.0Gbps.

•Full metal removable HDD/SSD tray (MB996TK-B x 6) specifically designed for medical & military systems.
•Hot-swap design for effortless system maintenance.
•All metal design built to meet the toughest environment and to compliant with flammability requirement.
•Metal key lock for extra security.
•Support both 2.5” SATA HDD/SSD – 7mm to 9.5mm.
•Support SATA I/II/III up to 6.0Gbps.

• Full metal removable ODD tray (MB994OT-B x 1) commercially designed for medical & military systems.
• Ultra low profile space saving design.
• Hot-swap design for effortless system maintenance.
• Support both disc tray and slot-in type slim optical drive.
• Support SATA I/II/III 6.0Gbps slim optical drive.

•Full metal removable SSD/HDD tray (MB994TK-B x 2) specifically designed for medical & military systems.
•Hot-swap design for effortless system maintenance.
•All metal design built to meet the toughest environment and to compliant with flammability requirement.
•Metal key lock for extra security.
•Support both SSD and HDD – 7mm to 15mm.
•Support SATA I/II/III 6.0Gbps.

•Full metal removable SSD/HDD tray (MB996TK-B x 2) specifically designed for medical & military systems.
•Hot-swap design for effortless system maintenance.
•All metal design built to meet the toughest environment and to compliant with flammability requirement.
•Metal key lock for extra security.
•Support both SSD and HDD – 7mm to 9.5mm.
•Support SATA I/II/III 6.0Gbps

• Full metal removable SSD/HDD tray (CO994TK-B x 1) specifically designed for medical & military systems.
•Hot-swap design for effortless system maintenance.
•All metal design built to meet the toughest environment and to compliant with flammability requirement.
•Metal key lock for extra security.
•Support both SSD and HDD – 7mm to 15mm.
•Support SATA I/II/III 6.0Gbps.

•Removable SSD/HDD tray specifically designed for medical & military systems
•Versatile design to accommodate 2.5” and 3.5” drive form factor
•Hot-swap design for effortless system maintenance
• Metal chassis design built to meet the toughest environment and to provide complete drive protection
•Support SATA I/II/III 6.0Gbps

•Fits 2x M.2 PCIe NVMe SSD from 30-110mm (2230, 2243, 2260, 2280, 22110)
•Uses 1x PCIe 3.0/4.0 x8 or x16 slot (PCIe Bifurcation x4, x4, x4, x4 for PCIe 16x and x4, x4 for PCIe 8x is required to access both drives)
•Installs to a single-width full-height PCIe express slot
•Removable drive tray with tool-less drive installation for easy drive maintenance
•Eagle-hook lock system keeps the drive secured in the enclosure
•EMI- Grounding – protects the hard drive from electrical damage

metal_tray_enclosures,nvme_enclosures,high_density_enclosures

Compatible 2.5" drive tray (caddy) with metal lock for ICY DOCK ToughArmor MB516/MB924/MB998 series mobile rack enclosures.

Compatible 3.5" drive tray (caddy) for ICY DOCK MB122/MB123 series mobile rack enclosures.

•Supports 2x 2.5-inch U.2/U.3 PCIe NVMe SSD, up to 15mm drive height
•Installs into any standard external 5.25-inch optical drive bay
•Uses 1x Slimline SAS (SFF-8654-8i) connector
•Uses a single 15-pin SATA power cable
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Removable EZ Slide Mini drive tray system for easy maintenance

nvme_enclosures,metal_tray_enclosures

•Supports 4x PCIe NVMe U.2/U.3 SSD, up to 15mm drive height
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Ruggedized full-metal enclosure meeting flammability requirements

metal_tray_enclosures,nvme_enclosures

•Fits 2x 2.5” U.2/U.3 NVMe SSDs from 5-9.5mm height •Installs into standardized external 3.5” device bay (floppy bay) •Uses 2x Slimline SAS (SFF-8654 4i) connector, pinout defined by SFF-9402 Rev 1.1 •Supports NVMe 4.0 64Gbps transfer rates per drive bay •Ruggedized full-metal enclosure and drive trays •2-segment key lock for additional physical security
nvme_enclosures metal_tray_enclosures

•Fits 4 x M.2 NVMe SSD with drive lengths from 30mm to 80mm (2230 / 2242/ 2260 / 2280) in a single PCIe x16 expansion slot (Full-height, half-length)
•Uses 1x PCIe 3.0/4.0x16 slot (PCIe Bifurcation x4, x4, x4, x4 for PCIe 16x is required to access both drives)
•Supports transfer speeds up to 64Gbps per M.2 NVMe PCIe SSD
•Removable drive tray with tool-less drive installation design for easy drive maintenance
•Integrated individual M.2 drive heat sinks and thermal pads for max heat dissipation
•Equipped with a 50mm blower fan offers maximum cooling to M.2 NVMe SSD
•Individual drive activity LED indicator (Solid green for power and flashing green for drive activity)

•Fits 4 x E1.S (EDSFF) NVMe SSD (5.9mm/8.01mm/9.5mm/15mm) or
4x M.2 NVMe SSD (2230/2242/2260/2280/22110) in a 5.25" external drive bay.
•Uses 2 x MCIO 8i (SFF-TA-1016 8i) port supports PCIe 5.0x4 of up to 128Gbps data transfer rates.
•Full-metal housing and drive tray provide excellent durability and robustness - ideal for the enterprise-level data storage environment.
•Equipped with dual 40mm detachable fans for superior cooling performance.
•The Eagle-hook tray latch design securely holds the drive trays within the enclosure.
•Anti-Vibration (AVT) technology provides a stable and safe operating environment for SSDs.

•Supports 4x 2.5" SAS/SATA HDDs/SSDs (up to 9.5mm drive height)
•Install into any standard external 5.25" drive bay
•Supports SATA 6Gbp/s transfer speeds & SAS up to 12Gbp/s (SAS host required)
•Tray-less and door-less design for hot-swapping bare drives without tools or screws
•Reduce cable clutter by using a single 15-pin SATA power connection to power four drives
•Soft blue drive activity LED for each drive (Solid blue for power and flashing blue for drive activity)

sas_sata_enclosures,tray-less_enclosures

•Supports 1x 2.5" U.2 NVMe PCIe 3.0/4.0 SSD (up to 15mm drive height)
•Uses 1x Slimline SAS (SFF-8654) connector, pin-out defined by SFF-9402 Rev 1.1
•Fits in 1x external 3.5" drive bay
•Compliant with PCIe 3.0/4.0 up to 64Gbps transfer speeds
•Heavy-Duty full-metal chassis with industrial-grade ABS plastic
•Door-less and tray-less design for a quick bare drive swap

nvme_enclosures

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB741SP-B mobile rack enclosure.

•Supports 8 x PCIe M.2 NVMe SSDs of all lengths - 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into 1 x standard external 5.25" optical drive bay
•Uses 8 x OCuLink (SFF - 8612) to connect, pin-out defined by SFF - 9402 Rev 1.1
•Supports PCIe 4.0 specifications with transfer rates up to 64Gbps per drive bay
•Powers 8 x M.2 SSDs through 2 x 15 - pin SATA power connectors
•Ruggedized full - metal enclosure meeting flammability requirements

nvme_enclosures,tool-less_tray_enclosures,high_density_enclosures

•Supports 4x PCIe NVMe U.2 SSD, up to 15mm drive height
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Ruggedized full-metal enclosure meeting flammability requirements
•Removable tray system for easy maintenance

metal_tray_enclosures, nvme_enclosures

•Fits 4x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCulink (SFF-8612) to connect (NVMe host required)
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Patent-pending screw-less M.2 adjustable locker holds all length drives securely
•Removable and tool-less drive installation design for easy drive maintenance

metal_tray_enclosures,nvme_enclosures ,tool-less_tray_enclosures

•Supports 1x 3.5" SAS/SATA HDD (SAS host is required for SAS HDD)
•Installed into any standard external 5.25" drive bay
•Tray-less design for hot-swapping bare drives without tools or screws
•Heavy-duty all-metal door latch for best drive protection
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (Single channel SAS only)
•Supports SATA data and power cables with locking latches

tray-less_enclosures,sas_sata_enclosures

•Supports 4x 2.5" SAS/SATA HDD/SSD (5-9.5mm)
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (Single channel SAS, SAS host required)
•Installs into any standard external 5.25" optical drive bay
•Tray-less and door-less design for hot-swapping bare drives without tools or screws
•Improved individual drive power button and robust drive ejection button/mechanism
•High performance 40mm cooling fan with adjustable fan speed control and on/off jumper

sas_sata_enclosures,tray-less_enclosures

•Supports 2 x 2.5” or 3.5” SATA HDD/SSD
•Installs into any standard external 2 x 5.25” optical drive bay
•Supports up to 6 Gbps data transfer speed
•Built-In JMS562 hardware RAID 1 mirroring (SAFE) chipset
•Easy to read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process supports SATA and 15-pin power cable with locking latch design
•Anti-Vibration Technology (AVT) – reduces noise and protects against environmental damage

sas_sata_enclosures,drive_tray_enclosures

•Supports 2 x 2.5” SATA HDD/SSD, from 5-15mm height
•Installs into any standard external 1 x 5.25” optical drive bay
•Supports up to 6 Gbps data transfer speed
•Built-In JMS562 hardware RAID 1 mirroring (SAFE) chipset
•Easy to read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process
•Anti-Vibration Technology (AVT) – reduces noise and protects against environmental damage

metal_tray_enclosures,sas_sata_enclosures,compatible_525_enclosures

•Supports 24 x 2.5" SAS/SATA SSDs & HDDs, up to 7mm in height
•Installs into 3 x standard external 5.25" bay
•Transfer speed up to 12Gb/s for SAS drives & 6Gb/s for SATA drives
•Powers 24 x 2.5" SAS/SATA drive through 6 x 15-pin SATA power connector
•Connects 24 x 2.5” SAS/SATA drive through 6 x MiniSAS HD (SFF-8643) connector
•Large 80mm cooling fan with three-mode fan speed control (high/low/off)

metal_tray_enclosures,minisas_hd_enclosures,sas_sata_enclosures,high_density_enclosures,compatible_525_enclosures

•Fits 12 x M.2 SATA SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into 1 x standard external 5.25" device bay
•Powers 12 x M.2 SSD through 2 x 15-pin SATA power connector
•Connects 12 x M.2 SSD through 3 x OCuLink (SFF-8612) connector
•40mm cooling fan with three-mode fan speed control (high/low/off)

sas_sata_enclosures,tool-less_tray_enclosures,high_density_enclosures

•Fits 1x EDSFF E1.S SSD with a maximum drive thickness of 5.9mm
•Use 1x PCIe 4.0 x4 interface, also supports installation into PCIe 1.0/2.0/3.0/4.0 x4, x8, and x16 slots
•Support PCIe 4.0 x4 with transfer rates up to 64Gbps
•Includes half-height and full-height PCIe brackets
•Removable drive tray with tool-less drive installation design for easy drive maintenance
•Low profile design allows for multiple bays to be installed side-by-side in a modular design

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB742SP-B mobile rack enclosure.

Compatible M.2 SSD tray (caddy) for ICY DOCK ToughArmor MB833 and MB834 series mobile rack enclosures.

Compatible M.2 SSD tray (caddy) for ICY DOCK ToughArmor MB720 series mobile rack enclosures.

Compatible M.2 SSD tray (caddy) for ICY DOCK ToughArmor MB601VK-1B/MB601M2K-1B series mobile rack enclosures.

Note: Not Compatible with MB601VK-B

Compatible U.2 SSD tray (caddy) for ICY DOCK ToughArmor MB601VK-1B/MB601M2K-1B series mobile rack enclosures.

Note: Not Compatible with MB601VK-B

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB732SPO-B mobile rack enclosure.

Compatible M.2 SSD tray (caddy) for ICY DOCK ToughArmor MB840/MB842/MB852/MB872/MB873 series mobile rack enclosures.

•Device holds single 3.5" SATA drive and fits any standard external 5.25" bay
•Support SATA 3.0 up to 6Gbps / SAS3.0 up to 12Gbps
•Removable tray system and hot swap capability offers convenient solution for multi-drive exchangeability & maintenance
•Rear warm air outtake fan ensures an optimal cooling environment
•Safeguard key lock function keeps data secure within the enclosure
•Aluminum body construction provides superior heat dissipation

drive_tray_enclosures,sas_sata_enclosures

•Accommodates 1x 3.5" SATA HDD and 2x SATA HDD/SSD (up to 9.5mm drive height)
•Installs into any standard external 5.25" device bay
•Retractable dust cover for 3.5" slot to reduce the dust buildups in the system
•Supports SATA 6Gbp/s transfer speed
•Tool-less, screw-less, and door-less drive installation
•A single 15-pin SATA power connector powers all drives

sas_sata_enclosures,tray-less_enclosures

•Fits 2x M.2 PCIe NVMe SSD with all length - 2230 (30mm), 2242, (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Uses 2x OCuLink Gen 4 connector and support up to 64Gbps transfer speed per each bay
•OCuLink connector pinout supports SFF-9402 specification
•Installs into 9.5mm ultra-slim optical disk drive (ODD) bay *Minimum ODD bay clearance requirement - 160mm
•Designed for customized Industrial-PC, server rackmount, and embedded systems
•Removable drive tray with tool-less drive installation design for easy drive maintenance
•Eagle-hook lock system keeps the drive secure in the enclosure

nvme_enclosures,tool-less_tray_enclosures,high_density_enclosures,slim_odd_enclosures

•Fits 8 x 2.5" U.2 NVMe SSDs into 2 x 5.25" external drive bay
•Removable drive tray for easy drive installation and removals
•Uses 4 x MCIO 8i ports to connect (NVMe host required)
•MCIO 8i connector pinout supports SFF-TA-1016 8i specification
•Supports the full PCIe 5.0 x4 bandwidth specifications of 128GB/s per drive bay
•Ruggedized full metal housing and tray that meets flammability requirement

•Fits 1x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Use 1x PCIe 3.0/4.0 x4 interface, also supports installation into PCIe 3.0/4.0 x8 and x16 slots
•Install into a single-width full-height/half-height PCIe expansion slot
•Removable drive tray with tool-less drive installation design for easy drive maintenance
•Low profile design allows for multiple bays to be installed side-by-side in a modular design
•Eagle-hook lock system keeps the drive secure in the enclosure

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures

•Installs into any standard 5.25" drive bay
•Fits 6x 2.5” U.2/U.3 NVMe PCIe SSD (up to 9.5mm drive height)
•Removable drive tray supports U.2 hot plug function, offer easy drive maintenance
•3 x SlimSAS 8i (SFF-8654), compatible with SFF-9402
•Supports the full PCIe 4.0 x4 bandwidth specification of 64Gb/s(per drive bay)
•Ruggedized full-metal enclosure, meeting flammability requirements

•Fits 2 x 2.5" SAS/SATA SSD/HDD (9.5mm height) into a single external 3.5" drive bay.
•Dual Locks design – metal key lock (for drive security) and thumb screw lock (for impact/vibration).
•IP65 waterproof and dustproof design on the front panel.
•Removable drive tray for hassle-free maintenance and easy hot-swap.
•Single SATA 15pin power cable to power the device.
•EMI Grounding – protect M.2 drives from electrical damage.

•Fits 1 x 2.5" SAS/SATA SSD/HDD (15mm height) into a single external 3.5" drive bay.
•Dual Locks design – metal key lock (for drive security) and thumb screw lock (for impact/vibration).
•IP65 waterproof and dustproof design on the front panel.
•Removable drive tray for hassle-free maintenance and easy hot-swap.
•Single SATA 15pin power cable to power the device.
•EMI Grounding – protect 2.5” drives from electrical damage.

•Fits 12 x M.2 SATA SSD of all length – 30mm 2230, 42mm 2240, 60mm 2260, and 80mm 2280
•Two ways drive removal design - Single pull multi-drive ejection mechanism using a single VPX connector or individual drive tray ejection
•Adjustable drive locker holds all length drive securely
•Ruggedized full-metal enclosure meeting flammability requirements
•Uses 3 x miniSAS HD (SFF-8643) and 2 x SATA 15pin power
•Supports full SATA III bandwidth specifications of 6 Gbp/s

•Supports 6 x 2.5" 15mm height U.2 NVMe drive
•Single pull multi-drive ejection mechanism using a single VPX connector
•6 x SFF-8643 rear connectors
•Full-metal Chassis and Trays
•Ample ventilation holes in the front and rear for maximum passive cooling
•Standardized screw holes / thread on both sides of the device for easy external 5.25” bay installation

•Supports 12 x 2.5" 7mm height SAS/SATA drives
•Single pull multi-drive ejection mechanism using a single VPX connector
•Uses 3 x SFF-8643
•Full-metal Chassis and Trays
•Ample ventilation holes in the front and rear for maximum passive cooling
•Standardized screw holes / thread on both sides of the device for easy external 5.25” bay installation

•Compatible with Mac Pro 2008-2012 models with no driver required
•Fits 1x SATA hard drive or SSD from 7mm to 9.5mm in height
•Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots
•Installs into single-width PCIe expansion slot
•PCIe interface provides both power and data transfer which ultimately reduce cable clutter
•Narrow design allows for multiple bays to be installed side-by-side in a modular design

metal_tray_enclosures,nvme_enclosures other_compatible_enclosures,sas_sata_enclosures

•Fits 2x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 3.5” device bay or floppy bay
•Uses a miniSAS HD port (SFF-8643) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps

metal_tray_enclosures,nvme_enclosures , minisas_hd_enclosures,tool-less_tray_enclosures

•Fits 1x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 3.5” device bay or floppy bay
•Uses a miniSAS HD port (SFF-8643) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps

metal_tray_enclosures,nvme_enclosures , minisas_hd_enclosures,tool-less_tray_enclosures

Compatible 2.5" drive tray (caddy) with dual lock for ICY DOCK ToughArmor MB492SKL-B mobile rack enclosures.

Compatible 2.5" drive tray (caddy) with dual lock for ICY DOCK ToughArmor MB491SKL-B mobile rack enclosures.

•Fits 4x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 5.25” device bay
•Uses 4x miniSAS HD (SFF-8643) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps per channel

metal_tray_enclosures,nvme_enclosures , minisas_hd_enclosures,tool-less_tray_enclosures

•Fits 1x 2.5” U.2 NVMe SSD or 2.5" SAS / SATA SSD
(NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD)
•Installs into any standard external 3.5” device bay or floppy bay
•Uses an U.2 port (SFF-8639) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps
•Ruggedized full-metal enclosure meeting flammability requirements
•2-segment key lock for additional physical security

nvme_enclosures,metal_tray_enclosures

•Fits 1x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Installs into any standard external 3.5” device bay or floppy bay
•Uses a U.2 port (SFF-8639) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps
•Ruggedized full-metal enclosure meeting flammability requirements

nvme_enclosures,metal_tray_enclosures,tool-less_tray_enclosures

•Low profile design for small form factor applications such as industrial small PCs, surveillance, embedded systems, automation systems, aerospace systems and mobile DVR systems
•Dual Locks design – Metal key lock (for drive security) and thumb screw lock (for impact/vibration)
•Removable drive tray design for easy maintenance which fully supports SATA hot-swap
•Unique drive ID plugs for drive trays are included (#1 - #8)
•Fits 1 x 5mm to 15mm height 2.5” SATA HDD or SSD in external 3.5” drive bay
•Supports SAS or SATA HDD/SSD at 6Gbps and is backwards compatible with SATA 3Gbps drives and hosts (SAS host is required for SAS drives)

metal_tray_enclosures,sas_sata_enclosures

•Perfect for rugged applications and complies to flammability requirements
•Fits 4 x 2.5” U.2 NVMe SSD
(NVMe U.2 host is required to accept NVMe SSD)
•Supports NVMe 64Gb/s transfer rate
•Fits any external 5.25” drive bay
•Dual 40mm fans keep your drives from overheating
•Requires only 2 x 15pin power connectors to power all 4 bays
•Drive label plugs to keep track of your RAID drives

metal_tray_enclosures,nvme_enclosures , minisas_hd_enclosures

Compatible 2.5" drive tray (caddy) with metal lock for ICY DOCK ToughArmor MB411SPO-2B and MB993SK-B mobile rack enclosures.

•Fits 3 x 3.5” SAS / SATA HDD into 2 x 5.25” Device Bays
•Supports SATA 3 (6 Gb/s) transfer rate
•Supports SAS Single Channel
•Compact and space saving design to fit multiple drives
•Tray-less design for tool-less drive installation. Ideal for genuine plug & play and hot swap use
•Lightweight aluminum body construction for durability and heat dissipation

•Rugged metal housing with durable ABS caddies for maximum security and protection
•Fits 1x 2.5" SAS/SATA HDD/SSD, and installs into a single 3.5" external bay (floppy bay)
•Supports 2.5" drives with 5mm, 7mm, 9.5mm, 12.5mm, and 15mm height
•Multi-Flow Technology - Provides excellent passive cooling
•Active Power Technology - Only powers on when a drive is installed, saving power
•Advances ExpressCage drive caddy MB741TP-B, with new drive-gripping mechanism, strengthened single-piece latch, and tool-less drive installation

tool-less_tray_enclosures,sas_sata_enclosures

•Rugged metal housing with durable ABS caddies for maximum security and protection
•Fits 2x 5mm-15mm 2.5” SATA HDD/SSD & 1 x Ultra Slim / Slim optical disk drive (ODD)
•Fits any external 5.25" drive bay
•Multi-Flow Technology – provides excellent passive cooling
•Accommodates 2.5" drives with 5mm, 7mm, 9.5mm, 12.5mm & 15mm height
•Active Power Technology (APT) - only powers up if there is drive installed in the drive bay

tool-less_tray_enclosures , slim_odd_drive_enclosures , 525_bay_adapters,sas_sata_enclosures,space-saving_enclosures

• Perfect for rugged applications and complies to flammability requirements
• Fits 8 x 5mm to 7mm 2.5” SATA hard drives or SSD’s in a single external 5.25” bay for high performance RAID applications
• Dual 40mm user-controllable fans, with settings for high, low, and off
• Connected by 2x Mini-SAS HD data cables for all 8 bays, for plug-and-play compatibility with most motherboards and RAID cards
• Requires only 2 x 15pin SATA power connectors to power all 8 bays (drives)
• Drive label plugs to keep track of your RAID drives

metal_tray_enclosures ,minisas_hd_enclosures, high_density_enclosures ,compatible_525_enclosures,sas_sata_enclosures

Compatible 2.5" drive tray (caddy) for ICY DOCK ToughArmor MB516/MB924/MB998 series mobile rack enclosures.

• Perfect for rugged applications and complies to flammability requirements
• Fits 8 x 5mm to 7mm 2.5” SATA hard drives or SSD’s in a single external 5.25” bay for high performance RAID applications
• Dual 40mm fans keep your drives from overheating
• Requires only 2 x 15pin power connectors to power all 8 bays
• Drive label plugs to keep track of your RAID drives
• Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs

metal_tray_enclosures, high_density_enclosures ,compatible_525_enclosures,sas_sata_enclosures

Compatible 2.5" drive tray (caddy) with metal lock for ICY DOCK ToughArmor MB092/MB111/MB118/MB411/MB604/MB608/MB839/MB992/MB996 series mobile rack enclosures. Note: Not compatible with MB411SPO-2B.

•Perfect for rugged applications and complies to flammability requirements
•Fits 6 x 5mm to 9.5mm 2.5” SATA HDD or SSD in a single external 5.25” bay for high performance RAID applications
•Supports SATA 6Gbps or SAS 12Gbps (single channel)
•Powerful 40mm user-configurable cooling fan with high, low, and off settings
•Individual metal key-lock mechanism for each bay
•Ample ventilation for improved cooling performance

metal_tray_enclosures,compatible_525_enclosures,sas_sata_enclosures

•Perfect for rugged applications and complies to flammability requirements
•Fits 6 x 5mm to 9.5mm 2.5” SATA HDD or SSD in a single external 5.25” bay for high performance RAID applications
•Supports SATA 6Gbps or SAS 12Gbps (single channel)
•Powerful 40mm user-configurable cooling fan with high, low, and off settings
•Individual metal key-lock mechanism for each bay
•Ample ventilation for improved cooling performance

metal_tray_enclosures , compatible_525_enclosures,sas_sata_enclosures

Compatible 2.5" drive tray (caddy) with metal lock for ICY DOCK ToughArmor MB105/MB508/MB601VK-B/MB602/MB607/MB699/MB991/MB994 series mobile rack enclosures.

•Perfect for rugged applications and complies with flammability requirements
•Fits 4 x 5mm to 15mm 2.5” SATA HDD or SSD in a single external 5.25” bay for high performance RAID applications
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs
•Active Power Technology (APT) - individual led & cooling fan only powers up if there is a drive installed in the bay
•1 x 4 pin power connector to reduce cable connections
•Dual 40mm cooling fans with fan power switch allow user to turn off the fans when using SSD

metal_tray_enclosures,compatible_525_enclosures,sas_sata_enclosures

•Perfect for rugged applications and complies with flammability requirements
•Fits 4 x 5mm to 15mm 2.5” SATA HDD or SSD in a single external 5.25” bay for high performance RAID applications
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs
•Active Power Technology (APT) - individual led & cooling fan only powers up if there is a drive installed in the bay
•2 x 4 pin power connector to reduce cable connections
•Dual 40mm cooling fans

metal_tray_enclosures,compatible_525_enclosures,sas_sata_enclosures

•Rugged Heavy duty full metal construction with suggested applications in Imaging, Medical, and Military systems, Media servers, and IPCs
•Supports up to 4 x 2.5" SATA/SAS HDD/SSD into single external 5.25" drive bay
•Support SATA 6Gbps or SAS 12Gbps (single channel)
•Accommodates 2.5" drives with 5mm, 7mm, 9mm, 12.5mm & 15mm Height
•Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
•Eagle-hook lock system & custom made metal key lock keeps drives secure within the enclosure

metal_tray_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Rugged Heavy duty full metal construction with commercially designed for Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies
•Perfect for rugged applications and complies with flammability requirements
•Perfect for SFF (small form factor) case, IPC, HTPC, NAS, Home Server and All-In-One computers
•Fits 2 x 2.5" SATA/SAS hard drive or SSD & 1 x slim optical disk drive (ODD)
•Accommodates hard drives or SSD with 5mm, 7mm, 9.5mm, 12.5mm & 15mm Height
•Accommodates Slim Optical Disk Drive with 12.7mm Height

metal_tray_enclosures , slim_odd_drive_enclosures,compatible_525_enclosures,sas_sata_enclosures

•Perfect for rugged applications and complies with flammability requirements
•Perfect for SFF (small form factor) case, IPC, HTPC, NAS, Home Server and All-In-One computers
•Fits 2 x 2.5" SATA/SAS hard drive or SSD & 1 x SATA slim optical disk drive (ODD)
•Accommodates hard drives or SSD with 5mm, 7mm, 9.5mm, 12.5mm & 15mm Height
•Accommodates Slim Optical Disk Drive with 12.7mm Height
•Supports SATA 6Gbps or SAS 12Gbps (dual channel)

metal_tray_enclosures , slim_odd_drive_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Rugged Full Metal construction, perfect for rugged applications and complies with flammability requirement
•Fits 3 x 5mm to 7mm 2.5” SATA HDD or SSD in external 3.5” drive bay
•Supports SAS or SATA HDD/SSD at 6Gbps and is backwards compatible with SATA 3Gbps drives and hosts (SAS host is required for SAS drives - Single SAS channel
•Individual LED indicators
•Multi-Flow Technology (MFT) - provides excellent passive cooling
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSD

metal_tray_enclosures,sas_sata_enclosures, high_density_enclosures/span>

Compatible 2.5" drive tray (caddy) for ICY DOCK ToughArmor MB092/MB111/MB118/MB411/MB604/MB608/MB839/MB992/MB996 series mobile rack enclosures. Note: Not compatible with MB411SPO-2B.

•Built-in hardware RAID controller allows four different configurations: RAID 0 (FAST), RAID 1 (SAFE), JBOD, & BIG
•Supports SATA 6Gbps and hot swap
•Removable tray system for easy maintenance
•Front LED indicator lights for drive power, access, fail and RAID 1 rebuilds status
•Full metal construction, perfect for rugged applications and complies with flammability requirements
•Fits 2 x 7mm to 9.5mm 2.5” SATA HDD or SSD in a 3.5” front device bay

metal_tray_enclosures,sas_sata_enclosures

•Full metal construction for durability and drive protection
•Removable EZ-Slide Mini tray supports hot-swap function
•Supports 2.5” SATA III hard drive / SSD with 5mm to 15mm height
•USB 3.0 interface supports UASP
•Universal drive slot that is compatible with wide range of ToughArmor drive tray includes MB991, MB992, MB994, MB996 and MB998 series
•Eagle-hook lock system & 2-segment safeguard key lock keeps drives secure within the enclosure

metal_tray_enclosures,sas_sata_enclosures ,other_compatible_enclosures

Compatible 2.5" drive tray (caddy) for ICY DOCK ToughArmor MB508/MB601VK-B/MB602/MB607/MB699/MB902/MB991/MB994 series mobile rack enclosures.

•Rugged heavy duty full metal construction with suggested applications in Imaging, Medical, and Military systems, Media servers, and IPCs, approved & used by Tier 1 companies
•Fits 1 x 5mm to 15mm 2.5” SATA HDD or SSD in external 3.5” drive bay
•Rugged heavy Duty Full Metal construction, perfect for enterprise applications
•Multi-Flow Technology - provides excellent passive cooling
•Anti-Vibration Technology - creates a safe environment for hard drives or SSDs
•Active Power Technology (APT) - individual led only powers up if there is drive installed in the drive bay

metal_tray_enclosures,sas_sata_enclosures ,other_compatible_enclosures

• EZ-Lock mechanism for tool-less drive installation
• Heavy Duty Full metal construction with matte black finish
• Fits 2 x 2.5” SSD/HDD into a single internal 3.5” drive bay
• Compatible with SSD or hard drives with 9.5mm height
• Anti-Vibration design for improved reliability
• Universally designed screw placement for maximum compatibility

drive_mounting_kits

•Durable one-piece design
•Anti-Vibration design for improved reliability
•Fits 2 x 2.5” SATA/IDE SSD/HDD into a single internal 3.5” drive bay
•Compatible with 2.5” SSD & HDD with 7mm to 9.5mm drive height
•Quick release eject mechanism for hassle free tool-less drive installation
•Universally designed screw placement for maximum compatibility

drive_mounting_kits

•Fits 1 x 5mm to 15mm 2.5" SAS/SATA HDD or SSD in external 3.5" drive bay
•Rugged heavy Duty Full Metal construction, perfect for enterprise applications
•Multi-Flow Technology - provides excellent passive cooling
•Anti-Vibration Technology - creates a safe environment for hard drives or SSDs
•Active Power Technology (APT) - individual led only powers up if there is drive installed in the drive bay
•EMI Grounding – protects hard drives from electrical damage

metal_tray_enclosures,sas_sata_enclosures , other_compatible_enclosures

•Rugged Heavy duty full metal construction with suggested applications in Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies
•Rugged Full Metal construction, perfect for rugged applications and complies with flammability requirement
•Fits 2 x 5mm to 9.5mm 2.5” SATA HDD or SSD in external 3.5” drive bay
•Supports SAS or SATA HDD/SSD at 6Gbps and is backwards compatible with SATA 3Gbps drives and hosts (SAS host is required for SAS drives)
•Multi-Flow Technology (MFT) - provides excellent passive cooling
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs

metal_tray_enclosures,sas_sata_enclosures

•Full steel construction commercially designed for medical & military systems, media servers, and HPC (high performance computer) systems, embedded systems and IPCs, approved & used by Tier 1 companies
•Perfect for rugged applications and complies to flammability requirements
•Fits 6 x 5mm to 9.5mm 2.5” SAS/SATA HDD or SSD in a single external 5.25” bay for I/O intensive data storage applications
•Support SATA 3.0 6Gbps or SAS 3.0 12Gbps (single channel)
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs
•Active Power Technology (APT) - individual LED & cooling fan only powers up if there is a drive installed in the bay

metal_tray_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Full steel construction commercially designed for Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies
•Perfect for rugged applications and complies to flammability requirements
•Fits 4 x 5mm to 15mm 2.5” SAS/SATA HDD or SSD in a single external 5.25” bay for high performance RAID applications
•Support SATA 3.0 6Gbps / SAS 3.0 12Gbps (single channel)
•Requires only a single 15pin power connectors to power all 4 bays
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs

metal_tray_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Rugged heavy-duty steel construction designed for industrial and commercial applications such as military and medical, servers, data centers, workstations, and portable computer systems
•Perfect for applications that must meet a flammability requirement
•Fits 6x SSDs or HDDs between 5mm and 7mm in height
•Supports SATA 3.0 6Gbps / SAS 3.0 12Gbps (single channel)
•Supports Ultra-Slim (9.5mm) Optical Disk Drive (ODD Drive)
•Spring-loaded ODD bracket for fast installation and removal

metal_tray_enclosures,slim_odd_drive_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Rugged heavy-duty steel construction designed for industrial and commercial applications such as military and medical, servers, data centers, workstations, and portable computer systems
•Perfect for applications that must meet a flammability requirement
•Fits 4x SSDs or HDDs between 5mm and 9.5mm in height
•Supports SATA 3.0 6Gbps / SAS 3.0 12Gbps (single channel)
•Supports Slim (12.7mm) or Ultra-Slim (9.5mm) Optical Disk Drive (ODD Drive)
•Spring-loaded ODD bracket for fast installation and removal

metal_tray_enclosures,slim_odd_drive_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Rugged heavy-duty steel construction designed for industrial and commercial applications such as military and medical, servers, data centers, workstations, and portable computer systems
•Perfect for applications that must meet a flammability requirement
•Fits 2x SSDs or HDDs between 5mm and 15mm in height
•Supports SATA 3.0 6Gbps / SAS 3.0 12Gbps (Single channel)
•Supports Slim (12.7mm) or Ultra-Slim (9.5mm) Optical Disk Drive (ODD Drive)
•Spring-loaded ODD bracket for fast installation and removal

metal_tray_enclosures,slim_odd_drive_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Fits 1x 2.5” U.2 NVMe SSD or 2.5" SAS / SATA SSD
(NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD)
•Fits any external 3.5" drive bay or floppy bay
•Supports NVMe 64Gb/s transfer rate
•Supports SATA 6Gb/s or SAS 12Gb/s (single channel)
•Accommodates 2.5" SSD with 5mm, 7mm, 9mm, 12.5mm & 15mm height
•Eagle-hook lock system & 2-segment safeguard key lock keeps drives secure within the enclosure

nvme_enclosures,metal_tray_enclosures

•Supports docking up to 2 x 2.5 inch SAS / SATA HDD / SSD with hot-swap function (5mm – 9.5mm)
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single channel)
•Fits any external 3.5” drive bay or floppy bay
•Full metal chassis with partial ABS-plastic for full protection
•Completely tray-less design and accepts bare drives without trays or holders
•Drive door-less design for quick hot-swapping

tray-less_enclosures,sas_sata_enclosures

•Supports docking 1 x 2.5” SAS/SATA HDD/SSD with SATA hot-swap functionality (5mm – 15mm)
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single channel) •Fits any external 3.5” bay
•Full metal chassis with industrial ABS plastic for full protection to the drive
•Completely tray-less design and accepts bare drives without trays or holders
•Drive door-less design for quick hot-swapping

tray-less_enclosures,sas_sata_enclosures

•Perfect for rugged applications that must meet flammability requirements
•Fits 16 x 5mm to 7mm 2.5” SATA/SAS hard drives or SSDs in 2x external 5.25” bays for high performance RAID applications
•Supports SATA 6Gbps or SAS 12Gbps (single channel)
•Large 80mm cooling fan circulates a massive amount of air, while running quietly
•Fan is user-adjustable, with settings for high, low, and off
•Powered by 4x 15-pin SATA power cables for all 16 bays

metal_tray_enclosures , minisas_hd_enclosures, high_density_enclosures,compatible_525_enclosures,sas_sata_enclosures

•Supports 1x 2.5" SATA SSD / HDD up to 7mm in height
•Fits into any 9.5mm ultra-slim optical disk drive bay
•Metal chassis with partial industrial ABS plastic for optimal protection
•Completely trayless, with tool-less drive installation design that accepts bare drives without trays or caddies
•Two-segmented drive ejection button with key lock for maximum security and to prevent accident ejections
•Eagle-hook mechanism locks drives into place and prevents the drive from falling out on systems prone to movement and vibration

tray-less_enclosures , slim_odd_enclosures,sas_sata_enclosures

•Supports 1x 2.5" SATA HDD / SSD (up to 9.5mm in height)
•Fits into any 12.7mm slim optical disk drive bay
•Metal chassis with partial industrial ABS plastic for optimal protection •Completely trayless, with tool-less drive installation design that accepts bare drives without trays or caddies
•Two-segmented drive ejection button with a key lock for maximum security and prevent accidental ejections
•Eagle-hook mechanism locks drive in space and prevent the drive from falling out on systems prone to movement and vibration
•Dust-cover keeps the housing when no drive is installed

tray-less_enclosures ,slim_odd_enclosures,sas_sata_enclosures

•Removable drive tray system for easy maintenance
•Rugged heavy duty full-metal construction of all internal and external components
•Perfect for rugged and industrial applications that must meet flammability requirements
•Fits 8x 5-15mm 2.5” SATA/SAS hard drives or SSDs in 2x 5.25” external CD/DVD drive bays
•Supports SATA 3.0 up to 6Gbps or SAS 3.0 up to 12Gbps (single channel)
•Large 80mm cooling fan with high, low, and off settings for full control

metal_tray_enclosures , minisas_hd_enclosures , high_density_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Low profile design for small form factor applications such as industrial small PCs, surveillance, embedded systems, automation systems, aerospace systems and mobile DVR systems
•Fits two drives in a single 3.5” front device bay which is perfect for RAID configurations
•Dual Lock Design - Metal key lock (for drive security) and thumb screw lock (for impact/vibration)
•Removable drive tray design allows easy maintenance and fully supports SATA hot-swap
•Unique drive ID plugs for drive trays are included (#1 - #8)
•Fits 2 x 5mm to 9.5mm height 2.5” SATA HDD or SSD in a external 3.5” drive bay

metal_tray_enclosures,sas_sata_enclosures

Compatible 2.5'/3.5" drive tray (caddy) for ICY DOCK FatCage MB153/MB155/MB876/MB901 series mobile rack enclosures.

•Exact same form factor of an ultra slim optical drive
•Fits 1 x 5mm to 7mm height 2.5" SATA HDD / SSD in a 9.5mm ultra slim ODD bay
•Supports transfer speed up to 6Gbps
•The receiving SATA connector rated for up to 10,000 drive insertions
•Removable EZ Slide Slim drive tray for easy maintenance
•Heavy duty full metal construction design - perfect for enterprise applications

metal_tray_enclosures,sas_sata_enclosures ,slim_odd_enclosures,sas_sata_enclosures

•Exact same form factor of a slim optical drive
•Fits 1 x 5mm to 9.5mm height 2.5” SATA HDD / SSD in a 12.7mm slim ODD bay
•Supports transfer speed up to 6Gbps
•The receiving SATA connector rated for up to 10,000 drive insertions
•Removable EZ Slide Micro drive tray for easy maintenance
•Heavy-duty full metal construction design - perfect for enterprise applications

metal_tray_enclosures,sas_sata_enclosures,slim_odd_enclosures ,other_compatible_enclosures,sas_sata_enclosures

•Ultra small form factor design for maximum space saving
•Fits 1 x 5mm to 9.5mm height 2.5” SAS/SATA HDD/SSD in a 12.7mm slim ODD slot or any FDD slot
•Supports SATA 3.0 up to 6Gbps / SAS 3.0 up to 12Gbps (Single channel)
•Removable EZ Slide Micro drive tray for easy maintenance
•Heavy duty full metal construction design - perfect for enterprise applications
•Multi-Flow Technology provides excellent passive cooling

metal_tray_enclosures,sas_sata_enclosures ,slim_odd_enclosures ,other_compatible_enclosures

•Ultra small form factor design for maximum space saving
•Fits 1 x 5mm to 9.5mm height 2.5” SAS/SATA HDD/SSD in a 12.7mm slim ODD slot or any FDD slot
•Supports 2.5” SAS (single channel)/SATA HDD/SSD up to 6Gbps transfer rate (SAS host is required for SAS drives)
•Eagle-hook lock system & 2-segment safeguard key lock keeps drives secure within the enclosure
•Supports SATA 6Gbps or SAS 3.0 12Gbps (Single channel)
•Removable EZ Slide Micro drive tray for easy maintenance

metal_tray_enclosures,sas_sata_enclosures ,slim_odd_enclosures ,other_compatible_enclosures,sas_sata_enclosures

•Only require a single 5.25” ODD drive bay space
•Supports up to 4x 2.5” HDD/SSD with 5mm, 7mm, and 9.5mm height
•Supports 1x Slim ODD (12.7mm height) or 1x Ultra-Slim ODD (9.5mm height)
•Unique built-in screw design with 2.5” drive caddies offers tool-less drive installation
•Patent-pending proprietary single-latch mechanism for easy drive installation and removal
•Unique multifunctional detachable ODD bay faceplate for ODD slot

drive_mounting_kits , 525_bay_adapters

•Fits 4 x 2.5” SATA HDD / SSD into a single extermal 5.25” bay
•Compatible with 2.5” HDD / SSD with 7mm to 9.5mm drive height
•Tool-less drive installation design with advanced drive stabilizer system
•Compatible with any standard external 5.25” bay
•Open frame design for maximum passive cooling
•Option to be used as a stackable drive organizing rack

drive_mounting_kits , 525_bay_adapters

•Durable one piece, lightweight construction
•Compatible with any standard 5.25” external drive bay
•Fits 1 x 3.5” device / hard drive and 1 x Ultra-Slim ODD
•Snap-off front panel dust covers for 3.5” bay and Ultra-Slim ODD bay
•Advanced device guiding system for smooth device / drive installation
•Smart-Tip locking mechanism for screw-less 3.5” device installation

space-saving_enclosures , drive_mounting_kits , 525_bay_adapters

•Compatible with any standard external 5.25” bay
•Fits 1 x 3.5” device / hard drive & 2 x 2.5” HDD/SSD
•Durable one piece, lightweight construction
•Snap-off front panel dust cover
•Smart-Tip locking mechanism for screwless 3.5” device installation
•Screw-less installation design for 2.5” HDD/SSD slots

space-saving_enclosures , drive_mounting_kits , 525_bay_adapters

•Supports up to 6 x 2.5" SATA HDD/SSD into a single 5.25" bay
•Support SATA III 6Gbps
•Hot-swappable bays for quick drive installation
•Accommodates 2.5" drives with 5mm, 7mm & 9.5mm height
•Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
•Removable ExpressTray system for tool-less, easy installation comparable to tray-less designs

tool-less_tray_enclosures

•Supports up to 4 x 2.5" SATA/SAS HDD/SSD into a single 5.25" bay
•Support SATA 6Gbps or SAS 3.0 12Gbps (Single channel)
•Hot-swappable bays for quick drive installation
•Accommodates 2.5" drives with 5mm, 9.5mm &12.5mm Height
•Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
•Removable ExpressTray system for tool-less, easy installation comparable to tray-less designs

tool-less_tray_enclosures,sas_sata_enclosures

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB324SP-B mobile rack enclosure.

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB322/MB326 series mobile rack enclosures.

•Compatible with any standard external 5.25” device bay
•Fits 2x 2.5” SATA/SAS HDD/SSD and 1x 3.5” HDD/Device
•Supports 2.5” SATA/SAS HDD/SSD of 5mm to 9.5mm height
•Supports SATA 6Gbps or SAS 3.0 12Gbps (Single channel)
•Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
•Soft blue indicator LED provided for each 2.5” HDD/SSD bay

tool-less_tray_enclosures , space-saving_enclosures , 525_bay_adapters,sas_sata_enclosures

•Tray less hot swappable drive cage
•Fits full sized and half height 3.5” SATA drives into a single external 5.25” bay
•Supports up to 6Gb transfer speeds (depending on host configuration)
•Heavy Duty all metal construction
•Locking mechanism to protect your data
•Ultra slim 80mm fan to keep your drives cool

•5 in 3 RAID capable backplane module
•Fits five 3.5” SATA I / II / III (SATA 6Gbps) hard drives in three external 5.25” device bay & fully supports SATA Hot-Swap function
•Supports SATA 3.0 up to 6Gbps / SAS 3.0 single channel up to 12Gbps
•Large 92mm cooling fan with full metal body for excellent heat dissipation for the most intense applications
•Compact and space saving to fit multiple drives
•Enhanced Direct Air Flow Design – Shuts off most vents while adding larger ventilation slots on the backplane PCB

drive_tray_enclosures,sas_sata_enclosures

•3 in 2 RAID capable backplane module
•Fits three 3.5” SATA I / II / III (SATA 6Gbps) hard drives in two external 5.25” bay & fully supports SATA Hot-Swap function
•Supports SATA 3.0 up to 6Gbps / SAS 3.0 up to 12Gbps
•80mm cooling fan with full metal body for excellent heat dissipation for the most intense applications
•Compact and space saving to fit multiple drives
•Interchangeable tray design with DataCage Basic MB876, DataCage Classic MB453/ 454/ 455, ICYBento MB559 & ICYCube MB561 series

drive_tray_enclosures , drive_tray_enclosures,sas_sata_enclosures

•Fits 3 x 3.5-inch SAS/SATA HDDs into 2 x 5.25-inch external ODD/device bays
•Supports full SATA III (6 Gb/s) transfer speeds
•Supports SAS single-channel operation (SAS host required)
•Compact and space saving design to fit multiple drives
•100% tool-less and screw-less drive installation
•Large 80mm cooling fan with easy access fan speed control wheel

tray-less_enclosures,sas_sata_enclosures

•Connects up to one 2.5” & 3.5” SATA HDD in a single external 5.25” bay for a space saving setup
•Supports a single 2.5” HDD/SSD from 9.5mm to 12.5mm height. (Up to 9.5mm while the 3.5” bay is in use)
•Fast and simple tool-less drive installation
•Able to run 2.5" & 3.5" SATA hard drive or SSD Simultaneously
•Individual SATA 6Gbps connection for each hard drive or SSD
•2 part anti-dust cover protects system internals even when a small 2.5” SATA drive is used

tray-less_enclosures

•Improved drive insertion mechanism ensures a sturdy connection and secures hard drives in place
•Reinforced door latches for a secured locking mechanism
•Fits 5 x 3.5" SATA III HDD into 3 x external 5.25" bays
•Compact and space saving design to fit multiple drives
•Designed for consumers & enthusiasts gaming / media / server computer cases and servers
•Tray-less design for genuine plug & play and hot swap use

tray-less_enclosures,sas_sata_enclosures,high_density_enclosures

•Compatible with any standard 5.25” external bay
•Fits 1x 3.5” SATA HDD and 1x 9.5mm Ultra-Slim ODD device
•Dual-purpose drive guiding mechanism & stabilizer
•Tray-less, screw-less, tool-less 3.5” drive installation
•Spring loaded dust cover for 3.5” bay, snap-off dust cover for ODD bay
•Both bays powered by a single 15-pin SATA power connector

tray-less_enclosures , slim_odd_drive_enclosures,sas_sata_enclosures,space-saving_enclosures

•Compatible with any standard 5.25" external bay
•Fits 1x 3.5" SATA HDD and 1x 2.5" SATA HDD/SSD (up to 9.5mm height while 3.5" drive is in use)
•Dual-purpose drive guiding mechanism & stabilizer
•Retractable dust cover to protect the internal connectors from dust buildups
•Tray-less, screw-less, door-less drive installation
•Both bays are powered by a single 15-pin SATA power connector

tray-less_enclosures,sas_sata_enclosures

•Device stores a single 2.5" or 3.5" SATA III 6Gbps drive and fits most standard external 5.25" bay
•Supports SATA 3.0 6Gbps / SAS 3.0 12Gbps (single channel)
•Hard drive power and activity LED indicators for essential drive status
•Safeguard key lock function keeps data secure within the enclosure during operation
•Full aluminum body construction provides superior heat dissipation
•40mm rear warm air outtake fan ensures an optimal cooling environment

drive_tray_enclosures,sas_sata_enclosures

•Perfect for rugged applications and complies to flammability requirements
•Fits 8 x 5mm to 7mm 2.5” SATA hard drives or SSD’s in a single external 5.25” bay for high performance RAID applications
•Dual 40mm fans keep your drives from overheating
•Requires only 2 x 15pin power connectors to power all 8 bays
•Drive label plugs to keep track of your RAID drives
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs

metal_tray_enclosures, high_density_enclosures , compatible_525_enclosures,sas_sata_enclosures

•Rugged metal housing with durable ABS caddies for maximum security and protection
•Fits 2x 5mm, 7mm, & 9.5mm 2.5” SATA HDD/SSDs, and installs into a single 3.5” external bay (floppy bay)
•Multi-Flow Technology – provides excellent passive cooling
•Accommodates 2.5" drives with 5mm, 7mm & 9.5mm height
•Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
•Advanced ExpressCage drive caddy MB742TP-B with a new drive-gripping mechanism, strengthened single-piece latch, and tool-less drive installation

tool-less_tray_enclosures,sas_sata_enclosures,tool-less_tray_enclosures