Frequent Asked Questions |
Q: What is the difference between the MB982SP-1S and the MB982IP-1S-1 model? |
A: The difference is the MB982SP-1S supports SATA hard drive or SSD only, while the MB982IP-1S-1 supports SATA and SAS hard drive or SSD with SAS dual channel support. |
|
Q: What is the difference between MB982SP-1S & MB382SP-3B and MB882SP-1S-1B(2B)? |
A:The MB882SP-1S-1B(2B) is the first 2.5" to 3.5" hard drive or SSD converter with an overall sturdy, reliable construction with easy access to the drive perfect for system integrators and IT professionals.
The MB982SP-1S is based off the MB882 series design but utilizes a full metal design creating a better environment for cooling, as well as giving it a rock solid construction ideal for industrial, enterprise, and military applications.
The MB382SP-3B is a new design based off the MB982SP-1S but with added open air design with exceptional cooling.
|
|
Q: Will this converter allow me to fit my SSD or 2.5" HDD into a 3.5" bay? |
A: The MB982SP-1S is a 2.5" to 3.5" hard drive converter. It will fit any standard 2.5"Â SATA hard drive or SSD into any standard 3.5" hard drive bay. |
|
Q: Will using this converter affect performance in any way? |
A: This converter will not affect performance in any way because the device interface is essentially a bypass. It will be like the hard drive is directly connected to the motherboard. |
|
Q: Does the MB982SP-1S support Samsung 840 series SSDs? |
A: Yes, this converter will support all 7-15mm 2.5" SATA hard drive or SSD. |
|
Q: Does the MB982SP-1S support SATA III hard drives or SSD with SATA III interface? |
A: The MB982SP-1S support SATA I / II / III hard drives or SSD with a SATA I / II / III interface. |
|
Q: MB982SP-1S 製品はSATA3.3規格をサポートしている Power Disable機能(PWDIS)に対応していますか? |
A: MB982IP-1S 製品はSATA3.3規格をサポートするPWDIS機能に対応していません。
PWDISを搭載したSATA HDD / SSDをMB982IP-1Sにインストールすると、ドライブが回転しません。正常な動作ができないので、システムはドライブを検出することができません。
PWDIS機能を備えた既知のSATA HDD / SSDについては、以下のリストを参照してください。
Known SATA HDD/SSD with Power Disable Feature (PWDIS)
WD |
Ultrastar DC HC510
HUH721010ALE600 |
HUH721010ALE604 |
HUH721010ALE601 |
HUH721010ALN600 |
HUH721010ALN604 |
HUH721010ALN601 |
|
Ultrastar DC HC510
HUH721008ALE600 |
HUH721008ALE604 |
HUH721008ALE601 |
HUH721008ALE600 |
HUH721008ALE604 |
HUH721008ALE601 |
|
Ultrastar DC HC520
HUH721212ALE600 |
HUH721212ALE604 |
HUH721212ALN600 |
HUH721212ALN604 |
|
|
Samsung |
PM883
MZ7LH240HAHQ |
MZ7LH1T9HMLT |
MZ7LH3T8HMLT |
MZ7LH480HAHQ |
MZ7LH7T6HMLA |
MZ7LH960HAJR |
|
|
注意: SAS HDD や 現状のSSDは、PWDIS機能にSATA15pin 電源コネクタ(3pin)を使用しません。その為、MB982IP-1Sでもご利用いただけます。
基本的にはPWDISを使用する SATA HDD や SSD を使用しないことをお勧めします。
ドライブを既に購入している場合は、以下の方法を使用してPWDIS機能を物理的に無効にすることで利用することができます。
※ 改造行為につながる為、HDDやSSDのサポートを受けられなくなる可能性がありますので自己責任で判断してご利用下さい:
方法1-
Molex-SATAアダプターまたはケーブルを使用します。 1-3pinへの通電をしないようケーブルを切断してください。
 |
|
 |
Molex to SATA Adapter |
|
Molex to SATA Cable |
方法2 –
以下のような方法で、SATA電源コネクタのピン1〜3にカプトンテープを貼り付け3.3V電源を物理的に通電しないようにします。
※カプトンテープの劣化でご利用になれなくなることも多々あります。
問題が解決しない場合は、sales@seijinshoji.co.jp にお問い合わせください。
|