ICYDOCK新製品の MB326SP-Bは搭載密度が高いリムーバブルケースとなり，標準の5.25"ベイ空間に6台の 2.5" SATA HDD / SSD(厚み9.5mm迄対応)を搭載可能です。デバイスインターフェースはSATA III 6GPS対応となり、SATAI及びSATAIIに互換性を持っております。また，電源自動起動技術(Active Power Technology. APT)を採用し、デバイスを搭載していない場合は自動的にオフモードに切り替え、省エネ効果を図れます。
Q: The mounting screws for the device seem to be too short to secure the device onto my system, what should I do?
A: For computer cases that have a thick metal sheet, the included mounting screws (M3*2.5L) may not fully secure the device. Please use longer screws (M3*4L) to secure the device or contact us at marketing@cremax.com.tw for replacement screws.
Q: I'm connecting SATA SSD to the MB326SP-B, but the drives did not show up in my system. However, when I connect the SSD directly to the motherboard/add-on card, I can access the SSD without a problem.
A: It may be the SATA signal decreasing when connecting multiple bridges at the same time and causing the issue. Using a higher quality or shorter cable may solve this problem. However, if the problem occurs after replacing the cable, it may be the SSD/HDD you are using requires 12V power, which is not supported by MB326SP-B. The MB326SP-B is not providing the 12V power as it's designed for non-enterprise drives. For using enterprise SATA SSD/HDD, we recommend choosing ToughArmor MB608SP-B or MB996SP-6SB. They both support 12V power and more suitable for enterprise applications.
Please see the list below for the SATA drive that using the 12V power.
Note: The ExpressCage MB326SP-B does not support SAS HDD/SSD, which also requires 12V power to be operated.
Q: Can I replace the cooling fan attached to the device? Will doing that void the warranty?
A:The cooling fan we used has been thoroughly tested with the drive enclosure to ensure it functions properly and supports the fan speed control (for select models). Therefore, we suggest our customers keep the original fan for the best result. However, we understand the stock fan may not be suitable for all the applications, so we elected to honor the warranty when 3rd party fan is using. The warranty may void if the 3rd party fan causes electrical damage to the device, though.
Q: Which specification should I check before buying the 3rd party cooling fan?
A:The following information is the fan specification requirement and compatible fan models for MB326SP-B
Fan Dimension (LxWxH)
40 x 40 x 10mm
40 x 40 x 20mm
Connector Type
3 Pin Wafer
Rated Voltage (VDC)
12V DC
Rated Current (A)
< 0.12A (127mA)
Screw Specification
Phillips Flat Head - M3 x 15mm - Steel (Came with stock fan)
Phillips Flat Head - M3 x 25mm – Steel (Not Included)
