CP082
大きいサイズ表示
 

As data storage technology moves from one standard to another, handling multiple different form factors and connection standards can be complicated. NVMe SSDs support transfer rates of over 5 times faster than their older SATA counterparts, but there are still advantages to using 2.5" SATA hard drives and SSDs. Using your existing SATA drives is more cost-effective than moving all your data storage needs to NVMe, and mechanical hard drives still support higher storage capacities than NVMe, making them ideal for mass storage. In times where NVMe SSDs are being used for applications requiring high-speeds, and 2.5" hard drives and SSDs and still being used for their higher capacities and legacy support, a better solution to bridge the gap between these two standards is surely needed.

 

Introducing the CP082, an all-in-one data storage enclosure that supports 2.5" SATA / SAS drives and M.2 / U.2 NVMe SSDs all in a single device. The 2x 2.5" HDD/SSD bays allow you to use high-capacity mechanical hard drives for mass storage, or to move your existing 2.5" SSDs alongside up to 6x M.2 NVMe SSDs. All 8 drives can run simultaneously, allowing for easy data transfer between SATA, SAS, and NVMe. CP082 takes full advantage of the NVMe bandwidth specification by using a 32Gbps OCulink (SFF-8612) data port for each M.2 drive. The innovative tray designed surrounds your delicate M.2 NVMe circuit boards with the full-metal trays, protecting them from drops, bumps, and rough installation. The full-metal ToughArmor chassis with ample ventilation holes provides further protection, making it suitable for industrial environments operating in harsh conditions. CP082 is perfect for anyone stuck in the gap between SATA and NVMe, as is designed specifically for use in industrial and workstation systems, high-performance servers, surveillance systems, military and medical systems, and any application where high capacity SATA drives and high speed NVMe storage can be combined.

 
Key Features
 
*
Two separate standalone PCBA assembly allows different configurations to be installed
*
Supports 6 x B+M / M Key M.2 NVMe SSD (2230 / 2242 / 2260 / 22110mm)
*
Supports 2 x 2.5' SAS/SATA device up to 15mm height
*
Full-Metal chassis and trays
*
Ample ventilation holes in the front and rear for maximum passive cooling
*
2.5" SAS/SATA bay uses ToughArmor MB991TRAY-B
*
Tool-less M.2 NVMe SSD metal tray
*
Standardized screw holes/thread on both sides of the device for easy external 5.25" bay installation
*
Individual LED indicator lights for each drive bay
*
Backed by full 3-year manufactures warranty with industry leading customer and technical support
Specifications
 
Model Number :
CP082
Color :
Black
Host Interface :
Module 1 : 6 x OCulink (SFF-8612)
Module 2 : 2 x SATA 7+15Pin
Drive Fit :
Module 1 : 6 x M.2 NVMe SSD (Compatible with 2230 / 2242 / 2260 / 2280 / 22110)
Module 2 : 2 x 2.5" SAS/SATA Device (Up to 15mm height)
Power Input :
Module 1 : 2 x SATA 15pin
Module 2 : 1 x SATA 15pin
Device Fit :
External 5.25" Drive Bay
Maximum Transfer Rate :
Depending on hard drive speed  
PCIe 3.0 x 4 up to 32Gbps / SATA III up to 6Gbps
SSD Access Indicator :
Device Power: Solid Green
Device Activity: Flashing Green
Device Empty: LED Off
Structure :
Full Metal
Package Content :
Device, User Manual, Screws
Weight :
900g(TBD)
Dimension (W x H x D) :
146.0 x 41.3 x 172mm

FB  
CP082
技術サポート&ダウンロード