External enclosures are a great way to have high capacity data storage on the go. Data can also be a critical factor for media, backup, or music professionals. Some of the top tier hard drive companies have made their own all in one enclosure with hard drive included. However, one of the known major causes of hard drive failure is due to excessive heat buildup caused by a lack of a proper cooling system. Also, a majority of hard drive manufactures only allow a 1 year warranty on their all in one external hard drives. This can be fatal for someone who has just lost their data and has to spend a significant amount of money in order to recover their data. There are other external enclosures in the market that provide a cooling system to help prevent this, but the physical placement of the cooling system does not always allow for the optimal airflow to cool the hard drive. Going above and beyond, the MB080USEB-1SB Blizzard is the next generation of external enclosures dedicated for maximum performance in cooling.
Elegantly Designed Hardware
The Blizzard has a uniquely designed front panel integrated with a massive 80mm fan for an elegant and nonintrusive design for the best ventilation, all in a single 3.5” hard drive that is installed into the front of the enclosure. There are two important reasons for the particular fan placement and design. First, the MB080USEB-1SB will be able to cool all sides of the hard drive and create only one direction of airflow from the front to the back, where the air then exits. This extends the life of the cooling fan as it only intakes cool cold air and increases the overall cooling efficiency of the hard drive, in comparison to other enclosure cooling designs. Second, the 80mm fan is integrated into the detachable front panel which allows to easily swap your hard drive without any screws or tools to worry about. On the sides includes two slightly concealed button ejectors that when pressed, will eject the front panel enabling the user to swap the hard drive as needed. Alongside our tool-less drive installation system, media producers can easily remove their hard drive from the Blizzard and directly transport their data to another location, ultimately removing the setup process of the enclosure.
Smarter Cooling Functionality
The rear panel comprises of a multitude of defining features coming all together from only the best ideas of our previous external enclosure models. The enclosure has a single LED brightness dial to effortlessly adjust the ambient LED brightness to your preferred liking. To increase the level of functionality, the Blizzard’s LED color will turn red when the hard drive temperature is over 50°C. The built in fan controller allows you to select low, high, and auto to properly cool the hard drive to help if such a case appears. The auto mode properly adjusts accordingly to your hard drive’s requirements by increasing or decreasing the fan speed as needed.
Everything but the Kitchen Sink
One of the most interesting features of the MB080USEB-1SB Blizzard is the Triple-Interface design. First off, the eSATA interface introduces increased performance which enables the user to transfer and get the job done much quicker with your laptops or PC system. Meanwhile, the USB 2.0 interface provides maximum compatibility while on your legacy PC or Mac to make sharing as easy as possible. Lastly, the Firewire 800 interface is perfect choice for any Mac system. With the MB080USEB-1SB supplying a variety of interfaces makes it the first and foremost choice for media professionals who are using different computer systems.
* Unique & Elegant design.
* Massive 80mm fan for optimal cooling.
* User replaceable front cooling fan for easy maintenance or aftermarket
replacement with 2 and 3 pin power ports available.
* Direct airflow design to completely cool all sides of the hard drive.
* Completely screw-less / tool-less design for any 3.5” SATA I/II/III HDD.
* FireWire 800, eSATA & USB 2.0 interface for maximum versatility.
* Backward compatible with USB 2.0 for wide-ranging use.
* 3 Speed Adjustable Cooling Fan, including auto setting featuring Smart
Cooling technology. Smart Cooling Technology is active in auto mode and
accurately adjusts the fan speed according to your hard drive’s needs.
* Cool blue ambient LED with adjustable brightness control.
* Smart-Temp functionality – Front LED changes from blue to red when over 50° C.
* Supports SATA 6Gbit hard drive.
* Great for Media and IT Professionals.
* Designed for PC & Mac systems.
3 Years Warranty
ICY DOCK Blizzard MB080USEB-1SB Tool-Less 1394b, eSATA & USB Ext 3.5” SATA HDD Enclosure - 80mm Fan
Model Number :
Drive Fit :
Single 3.5" SATA I / II / III hard drive
Host Interface :
1 x eSATA 3Gb/s port
2 x FireWire 800 port
1 x USB 2.0 port
Transfer Rate (max. bus speed):
Up to 3Gb/s via eSATA
Up to 800Mb/s via FireWire 800
Up to 480Mb/s via USB 2.0
Drive Cooling :
Fan Speed Control :
High/ Low/ Auto
HDD Access Indication :
Flashing orange LED
Power Indication :
Over Heat Indicator :
Red ambient LED light (when temperature reach 50° C)
OS Requirement :
Windows XP/ 2003/ VISTA/ 7/ 8
Mac OS 10.22.8 and higher
Power Supply :
12V/2A power adapter
ABS shell with metal frame
Dimension (L x W x H) :
237.5 x 126 x 146 mm
Prevent Personal Photos and Videos Leak
with ICY DOCK Storage Solution